Vibrators
Poker Vibrators
Model TCPV-01
This light and dependable vibrator is set up to remove bubbles from poured concrete, comfortable for the operator with the support strap and its easy to use quickly under all conditions
|
Model |
TCPV-01-1400 |
TCPV-01-600 |
|
Power Input |
1400W |
600W |
|
Voltage |
230V 50 Hz |
230V 50Hz |
|
No. load r.p.m |
16000 |
20000 |
Available in 110V 60 Hz
Model TCPV-02
Poker vibrator, portable electric with flexible shaft 1-2 meter long
power supply: 220-240V 50Hz
Vibrating Table
Model : TCVT-01 & TCVT-02
It is designed to carry a load of 140 kg . The apparatus consists of a motor fitted with a variable pitch pulley housed in a cabinet. The vibrations are imparted by means off-balance masses rotating on a shaft of a vibrator clamped to the underside of the table top. The table top is 50cm x 50cm and has stops along its edges to prevent moulds from walking off the table during vibration . A crass arm adjustable on a vertical rod at the centre of the table is provided to hold the moulds while operating the between a maximum of 3600 vibrations down to 2600 vibration per minute. A speed regulation handle is provided for increasing or decreasing frequency. A switch is provided for starting the motor. Suitable for operator on 440 Volts, A.C. Three Phase, 50 Cycles.
Note : Other table top size are available
