Water Bath for Cement Curing

Curing Tank : ZI 2032-A

a) 24 Hour cycle from time of mixing.
b) Controlled 35^oC or 100^oC ±2^oC Curing Temperature for concrete.
c) Controlled 27^oC ± 2^oC Curing Temperature for grey cement.
The tank has been designed to accommodate 150mm/70.6mm cube moulds upto 36/72 cube mould and fully insulated, complete with a hinged lid, heater, thermostat and re-circulated pump. Provision of two removable racks allowing free circulation of water around each mould. The pump, drain valves and electrical equipment are housed in a compartment located at one end of the tank. The Tank is heated by a immersion heater under normal conditions and refrigeration system for grey cement the temperature is controlled at 35^oC or 100^oC ± 2^oC / 27^oC +2^oC , expect for the 15 minutes after immersion of the freshly made specimens.

ZI 2032-1 Curing Tank for 6/12 moulds of 150mm / 70.6mm size

ZI 2032-2 Curing Tank for 12/24 moulds of 150mm / 70.6mm size

ZI 2032-3 Curing Tank for 24/48 moulds of 150mm / 70.6mm size

ZI 2032-4 Curing Tank for 36/72 moulds of 150mm / 70.6mm size

Note : Accelerated curing tank with cooling arrangement is also available of request.